"Ready Welder II MIG welding system can be powered by batteries or by AC current when connected to a welding machine as a spool gun. Welds steel, stainless steel, aluminum, or any weld-able metal or alloy. This product can be used as a spool gun or as a stand-alone welder. Ready Welder II welds with, or without a gas tank, as with flux core electrode wire. It operates on two or three 12-volt DC batteries in series, producing 200 to 350 Amps of power for deep penetration of metals. For thinner metals a 12 and a 6-volt battery connected in series to produce 18 DC volts and lower Amps works great. The Ready Welder, in its case, is light enough to be hand carried. Volts: 12 and 24, Amps: 400, Duty Cycle: 70% at 275 Amps, 24 Volts and 100% at 200 Amps, 24 Volts, Mig Ready: Yes, Weldable Metals: Steel, stainless steel, and aluminum, Weld Thickness (in.): 22-gauge to 3/4in., Regulator and Gas Hose Included: N/A, Welding Wire Diameter (in.): .023 - 3/64, Cart: N/A Connects to batteries: 12 V for thin metal, 24V for single-pass 1/2 in. @ 275 Amp, 36V for up to 3/4 in. @ 350 to 400 Amp AC to DC power converter to supply 24V DC to the welder circuitry when connected to constant stick welding machines Output range of 30-250 Amps @ 24 to 36V DC Five port switch with five separate range selections Includes: MIG gun, 10 ft. welding cable, 1 ground clamp, 1 spool of steel flux core wire, 2 battery clamps, and extra tips and gas hose fitting Model 10000ADP"
|
